Site icon My Geeks Help

Macbook Stuck On Apple Logo Screen

macbook stuck on apple logo

Here we come with the new and most discussed topic that is “How to fix the Mac won’t boot past Apple logo issue?”. So, we will directly move on to the cure. So, follow these steps if your Macbook stuck on the apple logo.

6 Ways to Fix Macbook Stuck on Apple Logo Screen

  1. Disconnect all the peripherals and restart
  2. For MacBook, try disconnecting the charger as well, if possible
  3. Use the Start-Up Manager to choose your boot drive
  4. Boot up in Safe Mode
  5. Repair Disk using Disk Utilities
  6. Run Apple Hardware Test or Diagnostics

And we will come to a brief explanation of these methods so that we will get out of the issue that Macbook stuck on the apple logo. So. Here we go:

METHOD 1: Check the power connection and disconnect all third-party peripherals

Check the power is on and your iMac/MacBook is correctly plugged in. If possible, change a power cable or try a different power adapter. If your mac is a laptop, it’s not necessary to boot immediately the moment after you plug it in.

Just give it a few moments after plugging it in and then turn it on. Often it could be that one of the third-party peripherals gets you, Mac, into trouble. Please shut you’re your Mac and disconnect all wired and wireless peripherals attached to your Mac computer, such as printers, USB hub, etc. This step will fix the MacBook stuck on the apple logo, otherwise follow our next step.

METHOD 2: Perform a power cycle

If you don’t hear the chime or any sign of life when you boot up, you should perform a special power cycle. On your Mac, you need to unplug the power cable and hold down the Power button for about 10 seconds. Without releasing the Power button connect the power cable. Wait 10 more seconds holding it and then start your Mac in a normal way.

METHOD 3: Use Command Line to Remove Google Chrome Update

Recently Google’s update software Keystone has shipped a Chrome update with a bug, which has resulted in the damage to the Mac file system on the Macs where SIP is disabled or doesn’t exist. If your Mac failed to boot after you installed the Google Chrome update, Google has provided a command line to fix the problem.

  1. Press and hold the Command and R keys while tapping the power button to start your computer.
  2. Click Utilities in the top menu bar and choose Terminal.
  3. Run the following command line, assuming your primary drive which contains your macOS is named Macintosh HD (change the name if it is not).
  4. Restart the Mac.

After those steps, the Google Chrome update should be removed, and the Mac file system should be restored. The Mac should boot correctly that will resolve MacBook stuck on the boot screen.

METHOD 4: Run Disk Utility in Recovery Mode

If your Mac is booting but the operating system is unable to load up, you may have a corrupted startup drive. Fortunately, it’s possible to repair the disk in Recovery Mode.

  1. Boot your Mac into Recovery Mode: hold down Command + R keys immediately after pressing the power button to turn on your Mac, release the keys until you see the Apple logo.
  2. From the macOS utility menu, select Disk Utility.
  3. Select the startup disk and click First Aid on the top menu bar
  4. Click Done and restart your Mac.

METHOD 5: Reset your Mac’s PRAM and NVRAM

  1. Press and hold the Power button for a few minutes till Mac turns off.
  2. Wait a few seconds and press the Power button to turn on Mac.
  3. Hold Command+Option+P+R keys while booting Mac to reset NVRAM.
  4. Reboot the computer again to see if the Mac computer can boot into macOS Mojave.

METHOD 6: Reset the System Management Controller (SMC)

When you Mac sleeps or shuts down unexpectedly and you can’t boot it, you can try resetting the System Management Controller (SMC).

If the battery is non-removable:

  1. Shut down Mac and plug in the power cord.
  2. Press Shift-Control-Option, then press the Power button.
  3. Hold the keys for about 10 seconds.
  4. Release the keys.
  5. Press Power as you would normally start your Mac.

If the battery is removable:

  1. Unplug your MacBook Pro from the power supply.
  2. Remove its battery.
  3. Press and hold down the Power button for 5 seconds.
  4. Release the Power button.
  5. Place the battery back in.
  6. Re-connect to the power supply.
  7. Press the Power button to boot your MacBook Pro.

On Mac Desktop Computers

  1. Unplug the power cable.
  2. Give it 15 seconds.
  3. Plug the cable back in.
  4. Wait for 5 more seconds and press Power again.

METHOD 7: Start the computer in Safe Mode

When starting the Mac in Safe Mode, the system will certain verifies your startup disk and attempts to repair directory issues. To boot up your Mac in Safe Boot, you need to shut the Mac down and start it up while holding down Shift. Release the Shift key when you see the login window. If your Mac loads successfully in Safe Mode, try restarting without pressing any keys.

METHOD 8: Erase and reinstall macOS

If the solutions above cannot fix the boot failure, you must reinstall macOS. The operation will erase the whole startup drive, please make sure you have backed up.

  1. Boot your Mac to Recovery Mode.
  2. Select Disk Utility from the macOS utility menu.
  3. Select the startup disk from the sidebar.
  4. Click on Erase from the top.
  5. Setup the required information to reformat the disk and click Done when finished.
  6. Go back to the macOS utility screen and select Reinstall macOS.

METHOD 9: Use Apple Hardware Test

If you are unable to erase the boot drive, there might be some hardware malfunctions on the drive. You can use the Apple Hardware Test to help determine whether the startup disk is physically damaged. To know the method, please refer to https://support.apple.com/en-us/HT201257. If your Macintosh has hardware problems, you should send it to the local repair center.

Fix Macbook Stuck on Boot Screen

Method 1: Reset NVRAM

MacBooks come with a special type of memory that stores many low-level settings for your MacBook. Sometimes you need to restore the NVRAM to get your computer functioning again. NVRAM controls many functions, including the speaker volume, screen resolution, and the startup disk selection.

When your MacBook can’t find the startup disk, it can hang on the boot screen indefinitely. Reset the NVRAM by powering down the MacBook; restart and immediately hold down the “Command-Option-P-R” keys simultaneously. When you hear the start-up chime a second time, release the keys.

Method 2: Startup Disk Selection

After resetting the NVRAM, you may need to select the startup disk. This issue usually affects computers with more than one hard drive. Start the computer as normal and hold down the “Option” key as the computer starts.

When the Startup Manager displays, use the left or right arrow keys to cycle between hard drive options. Select the main hard drive, usually called Macintosh HD, and press the “Return” key. Wait for your computer to boot into the operating system.

Method 3: Safe Mode

Safe Mode disables all but the most important applications that your computer needs to run. Starting in Safe Mode also includes an automatic disk check to verify and repair any issues with the operating system software.

If you boot into Safe Mode successfully, you can then shut down your computer and attempt to boot normally. To start in Safe Mode, shut down your computer and press the power button to restart; after you hear the start-up chime, press and hold the “Shift” key. Release the Shift key when you see the gray Apple logo.

Method 4: Disk Utility

Use Disk Utility to check the status of your hard disk and make sure that you don’t have a failing hard drive. Shut down your computer; restart and then hold down the “Command-R” keys until you see the OS X Recovery utility screen.

Select the “Disk Utility” option and select the “First Aid” tab. Select your hard drive from the sidebar and then click “Repair” to diagnose and repair the disk. If you have a failing hard drive, a notice displays telling you to back up your system and reformat the hard drive.

Method 5: Reinstall Mac OS

Reinstalling Mac OS X fixes any corrupt system files and repairs the operating system without deleting your files, applications, and other data. Restart and hold down the “Command-R” keys. After you access the OS X Recovery utility, you may need to select a Wi-Fi network so that your Mac can download the latest installation files. Select the “Reinstall OS X” option, click “Continue” and then follow the onscreen prompts to complete the reinstallation of your operating system.

So, by using these methods you can surely fix the issue of Macbook stuck on the apple logo screen and the boot screen.

Frequently Asked Questions (FAQ’s)-

Question: How to fix iMac not booting past the Apple logo

Ans: Follow the given steps to fix your iMac not booting past the Apple logo.

1: Restart your Mac and hold down the Command and R keys simultaneously.

2: At the same time, press the power button on your Mac to turn it off.

3: Turn your Mac back on and wait for it to boot up fully.

4: Select Disk Utility from the Applications folder or by typing “Disk Utility” in Spotlight Search.

5: Select your hard drive from the left column of Disk Utility’s sidebar, then click “First Aid” in Disk Utility’s toolbar.

6: Click “Repair Disk Permissions” and wait for it to finish repairing permissions.

Question: How to turn on apple logo on MacBook pro

Ans: Follow the given steps below to fix the process of turning on the apple logo on your MacBook pro.

1: Turn off your MacBook pro.

2: Press and hold the power button until you hear a second startup chime, then release it.

3: Hold down ctrl+alt+opt (⌥)+R until you see the Apple logo appear on your screen.

Question: What do you do if your mac is stuck on the apple logo

Ans: If your mac is stuck on the apple logo, follow these steps:

  1. Restart your computer by pressing and holding the power button for 5 seconds.
  2. Hold down the Command and R keys on your keyboard as soon as you see the Apple logo.
  3. Keep holding down Command-R until you see a gray screen with a progress bar at the top of it.
  4. Release both buttons when you see this screen and wait for your computer to finish restarting.

Question: How to Fix mac stuck on apple logo

Ans: The first step to take is to turn off the computer by pressing the power button. Then, you will need to press and hold the power button for about five seconds. The next step is to plug your Mac into a power outlet and wait for it to start up. If it does not start, then try a different outlet or plugging it in different way.

These steps do not work, then you might need to restart your Mac by pressing Command + R while clicking on Restart from the Apple menu.

If these steps do not work, then you might need to reset your Mac by holding down Command + Option + P + R keys at the same time while clicking on Reset from the Apple menu.

If these steps do not work, then you may need an external hard drive

Question: How to turn on apple logo light on macbook pro

Ans: The steps to turn on the apple logo light are:

  1. Turn on your Macbook and hold the “Fn” key then press “ctrl” and “shift” at the same time.
  2. The keyboard will light up with white LEDs, and you’ll see a white Apple logo on your screen that turns on as well.

Question: How to factory reset macbook pro

Ans: To factory reset a Mac, you need to do the following:

  1. Turn off your MacBook Pro and disconnect all cables
  2. Restart your Mac and hold down the Command-R key combination to start up from macOS Recovery
  3. Select ‘Disk Utility‘ from the list of options
  4. Select your Macintosh HD drive from the list of drives on the left
  5. Click on ‘Erase‘ tab and select ‘Mac OS Extended (Journaled)‘ as the format for erasing disk
  6. Name your new disk whatever you want it to be called
  7. Click on ‘Erase‘ button at bottom right corner of Disk Utility window

Question: macbook pro won’t boot past apple logo

Ans: If you are having problems with your MacBook Pro, it is likely that you need to take a few steps to get it back up and running.

First, make sure you have the latest software update installed. If not, install the latest update. Next, restart your Mac and hold down Command+R to boot into Recovery Mode. From there, choose “Disk Utility” from the top menu bar and then select your hard drive from the left column. Once selected, click on “Verify Disk” in the right column (you may need to press Command+Option+R). Once this process is complete, click on “Repair Disk Permissions.” This will fix any permissions issues that may be preventing your Mac from booting properly. Finally, restart your Mac and keep an eye on it

Exit mobile version