Macbook Stuck On Apple Logo Screen

Here we come with the new and most discussed topic that is “How to fix the Mac won’t boot past Apple logo issue?”. So, we will directly move on to the cure. So, follow these steps if your Macbook stuck on the apple logo.

6 Ways to Fix Macbook Stuck on Apple Logo Screen

  1. Disconnect all the peripherals and restart
  2. For MacBook, try disconnecting the charger as well, if possible
  3. Use the Start-Up Manager to choose your boot drive
  4. Boot up in Safe Mode
  5. Repair Disk using Disk Utilities
  6. Run Apple Hardware Test or Diagnostics

And we will come to a brief explanation of these methods so that we will get out of the issue that Macbook stuck on the apple logo. So. Here we go:

METHOD 1: Check the power connection and disconnect all third-party peripherals

Check the power is on and your iMac/MacBook is correctly plugged in. If possible, change a power cable or try a different power adapter. If your mac is a laptop, it’s not necessary to boot immediately the moment after you plug it in.

Just give it a few moments after plugging it in and then turn it on. Often it could be that one of the third-party peripherals gets you, Mac, into trouble. Please shut you’re your Mac and disconnect all wired and wireless peripherals attached to your Mac computer, such as printers, USB hub, etc. This step will fix the MacBook stuck on the apple logo, otherwise follow our next step.

METHOD 2: Perform a power cycle

If you don’t hear the chime or any sign of life when you boot up, you should perform a special power cycle. On your Mac, you need to unplug the power cable and hold down the Power button for about 10 seconds. Without releasing the Power button connect the power cable. Wait 10 more seconds holding it and then start your Mac in a normal way.

macbook stuck on apple logo

METHOD 3: Use Command Line to Remove Google Chrome Update

Recently Google’s update software Keystone has shipped a Chrome update with a bug, which has resulted in the damage to the Mac file system on the Macs where SIP is disabled or doesn’t exist. If your Mac failed to boot after you installed the Google Chrome update, Google has provided a command line to fix the problem.

  1. Press and hold the Command and R keys while tapping the power button to start your computer.
  2. Click Utilities in the top menu bar and choose Terminal.
  3. Run the following command line, assuming your primary drive which contains your macOS is named Macintosh HD (change the name if it is not).
  4. Restart the Mac.

After those steps, the Google Chrome update should be removed, and the Mac file system should be restored. The Mac should boot correctly that will resolve MacBook stuck on the boot screen.

METHOD 4: Run Disk Utility in Recovery Mode

If your Mac is booting but the operating system is unable to load up, you may have a corrupted startup drive. Fortunately, it’s possible to repair the disk in Recovery Mode.

  1. Boot your Mac into Recovery Mode: hold down Command + R keys immediately after pressing the power button to turn on your Mac, release the keys until you see the Apple logo.
  2. From the macOS utility menu, select Disk Utility.
  3. Select the startup disk and click First Aid on the top menu bar
  4. Click Done and restart your Mac.

METHOD 5: Reset your Mac’s PRAM and NVRAM

  1. Press and hold the Power button for a few minutes till Mac turns off.
  2. Wait a few seconds and press the Power button to turn on Mac.
  3. Hold Command+Option+P+R keys while booting Mac to reset NVRAM.
  4. Reboot the computer again to see if the Mac computer can boot into macOS Mojave.

METHOD 6: Reset the System Management Controller (SMC)

When you Mac sleeps or shuts down unexpectedly and you can’t boot it, you can try resetting the System Management Controller (SMC).

If the battery is non-removable:

  1. Shut down Mac and plug in the power cord.
  2. Press Shift-Control-Option, then press the Power button.
  3. Hold the keys for about 10 seconds.
  4. Release the keys.
  5. Press Power as you would normally start your Mac.

If the battery is removable:

  1. Unplug your MacBook Pro from the power supply.
  2. Remove its battery.
  3. Press and hold down the Power button for 5 seconds.
  4. Release the Power button.
  5. Place the battery back in.
  6. Re-connect to the power supply.
  7. Press the Power button to boot your MacBook Pro.

On Mac Desktop Computers

  1. Unplug the power cable.
  2. Give it 15 seconds.
  3. Plug the cable back in.
  4. Wait for 5 more seconds and press Power again.

METHOD 7: Start the computer in Safe Mode

When starting the Mac in Safe Mode, the system will certain verifies your startup disk and attempts to repair directory issues. To boot up your Mac in Safe Boot, you need to shut the Mac down and start it up while holding down Shift. Release the Shift key when you see the login window. If your Mac loads successfully in Safe Mode, try restarting without pressing any keys.

METHOD 8: Erase and reinstall macOS

If the solutions above cannot fix the boot failure, you must reinstall macOS. The operation will erase the whole startup drive, please make sure you have backed up.

  1. Boot your Mac to Recovery Mode.
  2. Select Disk Utility from the macOS utility menu.
  3. Select the startup disk from the sidebar.
  4. Click on Erase from the top.
  5. Setup the required information to reformat the disk and click Done when finished.
  6. Go back to the macOS utility screen and select Reinstall macOS.

METHOD 9: Use Apple Hardware Test

If you are unable to erase the boot drive, there might be some hardware malfunctions on the drive. You can use the Apple Hardware Test to help determine whether the startup disk is physically damaged. To know the method, please refer to If your Macintosh has hardware problems, you should send it to the local repair center.

Fix Macbook Stuck on Boot Screen

macbook stuck on apple logo

Method 1: Reset NVRAM

MacBooks come with a special type of memory that stores many low-level settings for your MacBook. Sometimes you need to restore the NVRAM to get your computer functioning again. NVRAM controls many functions, including the speaker volume, screen resolution, and the startup disk selection.

When your MacBook can’t find the startup disk, it can hang on the boot screen indefinitely. Reset the NVRAM by powering down the MacBook; restart and immediately hold down the “Command-Option-P-R” keys simultaneously. When you hear the start-up chime a second time, release the keys.

Method 2: Startup Disk Selection

After resetting the NVRAM, you may need to select the startup disk. This issue usually affects computers with more than one hard drive. Start the computer as normal and hold down the “Option” key as the computer starts.

When the Startup Manager displays, use the left or right arrow keys to cycle between hard drive options. Select the main hard drive, usually called Macintosh HD, and press the “Return” key. Wait for your computer to boot into the operating system.

Method 3: Safe Mode

Safe Mode disables all but the most important applications that your computer needs to run. Starting in Safe Mode also includes an automatic disk check to verify and repair any issues with the operating system software.

If you boot into Safe Mode successfully, you can then shut down your computer and attempt to boot normally. To start in Safe Mode, shut down your computer and press the power button to restart; after you hear the start-up chime, press and hold the “Shift” key. Release the Shift key when you see the gray Apple logo.

Method 4: Disk Utility

Use Disk Utility to check the status of your hard disk and make sure that you don’t have a failing hard drive. Shut down your computer; restart and then hold down the “Command-R” keys until you see the OS X Recovery utility screen.

Select the “Disk Utility” option and select the “First Aid” tab. Select your hard drive from the sidebar and then click “Repair” to diagnose and repair the disk. If you have a failing hard drive, a notice displays telling you to back up your system and reformat the hard drive.

Method 5: Reinstall Mac OS

Reinstalling Mac OS X fixes any corrupt system files and repairs the operating system without deleting your files, applications, and other data. Restart and hold down the “Command-R” keys. After you access the OS X Recovery utility, you may need to select a Wi-Fi network so that your Mac can download the latest installation files. Select the “Reinstall OS X” option, click “Continue” and then follow the onscreen prompts to complete the reinstallation of your operating system.

So, by using these methods you can surely fix the issue of Macbook stuck on the apple logo screen and the boot screen.