Table of Contents
HP Printer is the best printer available in the market, that is used by millions of users all over the world. But sometimes users face some problem while using or printing. If you are also facing any kind of problem with your Printer then follow the steps to fix the hp printer not printing windows 10.
How to Fix Hp Printer Not Printing Windows 10?
1-888-272-9xxx HP Support
Time needed: 2 minutes
Follow the steps given below to fix the hp printer not printing on windows 10. We tried our best to help you. If you failed to fix the hp printer problem, then call on hp printer support 1-888-272-9xxx USA toll-free.
- Step 1
Ensure that the HP printer cables are properly connected. Turn off the printer, unplug it and disconnect all of the printer cables. Plug it back in and reconnect the cables.
1. Check the status of the connection between your printer and your computer. If you are using a network connection, make sure all the details (IP address and ports) are aligned with your printer’s configuration.
2. Perform a power cycle of the entire setup (your computer and the printer) before you move on. There may be some misconfiguration that might induce unknown problems. Turn all the modules off, take out the power cord from the devices and let them sit like for 10 minutes before plugging everything back in. - Step 2
Check the HP printer cartridges and print heads to ensure that they’re installed properly. Also, see if the printer cartridges are empty. If the ink cartridges have sufficient ink, reinstall the cartridges and the print heads. If an ink cartridge is empty, replace it with a new one.
- Step 3
Make sure that the HP printer’s software is properly installed. If the device does not respond when you try to print or the printer software won’t initialize, uninstall and reinstall the HP printer software.
- Step 4
See if your computer’s firewall is preventing the HP printer from printing. Open your firewall preferences and add the printer software executable file (*.exe) as an exception or disable the firewall temporarily to see if this fixes the error.
- Step 5
Check the print settings of the printer and make sure that the margins are set to at least the minimum margins that your HP printer supports. Also, ensure that you’ve selected the correct printer settings for the paper size and type of document you’re trying to print.
- Step 6
Clean and align the printer cartridges. Open the software for your HP printer or the HP Solution Centre to access these maintenance features.
Solution 2: Cancel All Pending Printing Jobs
Double-click on the HP printer icon in the system tray on the bottom right of the screen, if it appears. Look under “Status” in the printing queue to read the error messages. Right-click on the entries and select “Cancel,” if necessary.
- Navigate to Devices and printers like we did earlier, right-click on the printer and click See what’s printing.
- On the new window which opens up, click on Printer and click Cancel all documents.
- Now you should check if you can print perfectly.
Solution 3: Restore Factory Setting
If all the above methods are not working in your case, you should consider restoring your printer to factory settings. When we restore to factory settings, all the existing configurations, profiles, and preferences will be removed automatically. Even the network connections will be reset so you have to connect it to your computer manually afterward. That will fix the hp printer not printing on windows 10.
Call 1-888-272-9xxx Printer Support USA
The method of factory reset might be different for different products. We will cover the two most generic methods here.
- Turn the printer off and take out the power cable. Wait for 1 minute before plugging it back in.
- Now turn the printer on while you press and hold the resume button for 10-20 seconds. The attention light will turn on. Once turned on, release the resume button.
- The attention and ready lights will cycle until the printer restored to factory settings.
If this doesn’t fit your printer, it usually means that your printer has another reset mechanism. Try the one below tricks:
- Turn the printer off and take out the power cable. Wait for 1 minute before plugging it back in.
- Now turn on your printer using the power button and take your hand to the touchscreen. Now, wait for the first part of the initialization bar to appear then press and hold it.
Solution 4: Clean the print heads
The leading problem which HP Printer users experience is the print heads jammed with dry ink. Steps of cleaning print heads are:
- Now take out the print head Do not force it out as it may break the components present inside.
- Once the bridge detached, turn on your tap and wait for warm water. Once the warm water is running, clean the print heads. This will remove all the blocked ink from the cartridges.
Conclusion:
If you have tried all the steps given here to fix the problem, then you should contact the hp printer customer service 1-888-272-9xxx. The printer support team will help you to fix the problems like hp printer not working, hp printer not printing or hp printer offline.
